As a practical UK budgeting guide, quartz-style engineered stone worktops can cost approximately £250 to £700 or more per square metre when supplied, fabricated and installed.
Simple designs and straightforward kitchen layouts tend to sit towards the lower end of this range. Premium marble-effect surfaces, thicker worktops, large islands, specialist edge details and complex fabrication can increase the final cost.
The price per square metre is only a starting point. Your final quotation will depend on the kitchen layout, the number of slabs required, sink and hob cut-outs, edge finishing, templating, delivery and installation.
At Mo’s Stonex, customers looking for the appearance commonly associated with quartz can explore Elorā, our engineered stone range presented as a 0% crystalline silica alternative to traditional quartz, based on the current product specification.
The following figures provide an indicative budgeting guide for a supplied, fabricated and installed worktop project.
| Worktop Category | Indicative Price |
|---|---|
Entry-level or simple designs | £250–£350 per m² |
Mid-range designs | £350–£500 per m² |
Premium marble-effect designs | £500–£700+ per m² |
Specialist 30mm or complex designs | £600–£1,000+ per m² |
How Much Do Quartz Worktops Cost for a Complete Kitchen?
For most homeowners, the total project cost is more useful than the square-metre price alone.
| Worktop Category | Price |
|---|---|
Small kitchen · approx. 2–4m² |
£900–£1,800 |
Medium kitchen · approx. 5–8m² |
£1,800–£3,000 |
Large kitchen · approx. 9–12m² |
£3,000–£5,000+ |
Large island or complex install |
Individually quoted |
A small galley kitchen with a standard sink and hob opening will usually cost less than a kitchen requiring a large island, waterfall ends, full-height splashbacks and multiple polished cut-outs.
These figures are intended for initial budgeting. Accurate pricing requires a kitchen plan, measurements and details of the selected surface.
A complete worktop quotation can include several different stages. Understanding each one makes it easier to compare offers from different suppliers.
The material cost depends on the chosen design, finish, thickness and availability. Plain or commonly stocked colours are generally easier to price than premium marble-effect designs or surfaces requiring careful vein positioning.
Templating records the exact dimensions of the cabinets, walls, appliances and other features before the worktop is fabricated. The kitchen cabinets normally need to be fully fitted, level and secured before the template appointment takes place.
Fabrication includes cutting the slabs to the required dimensions, forming joints, polishing exposed edges and preparing the worktop for installation. More detailed layouts generally require more workshop time.
The number and type of cut-outs affect the final cost. Fabrication may include:
A simple hob opening will normally require less fabrication than an undermount sink opening with polished edges, tap holes and drainer grooves.
Engineered stone worktops are heavy and require specialist handling. Large sections, islands and restricted access may require additional installers or lifting equipment. Access through doorways, staircases and communal areas should be considered before fabrication begins.
The following items may be priced separately:
Check the quotation carefully rather than assuming every item is included.
Plain colours and simple patterns are often less expensive than heavily veined or premium marble-effect surfaces. A strongly veined design may also require careful positioning across joints, corners and splashbacks. This can affect how efficiently the slabs are used.
The visible surface area does not always equal the amount of material that must be purchased. A large island, unusually deep worktop or long uninterrupted section may require an additional slab. Certain offcuts may not be suitable for reuse elsewhere in the kitchen. This is one reason why two kitchens with similar measurements can receive different quotations.
A simple straight run is generally easier to fabricate than a kitchen containing several corners, angled sections, pillars or curved details. Each joint and change of direction adds to the templating and fabrication requirements.
Common engineered stone worktop thicknesses include 20mm and 30mm. A 20mm option may cost less in some cases, but it is not automatically the cheapest choice. The final difference also depends on slab availability, weight, design and whether a built-up edge is required.
Read our full 20mm vs 30mm worktop guide for a more detailed comparison.
Polished undermount sink cut-outs, drainer grooves and recessed drainers require more fabrication than basic openings. Multiple sinks, taps, hobs or socket cut-outs can also increase the price.
A standard polished edge is normally the most economical option. Bevelled, rounded, mitred or built-up profiles require additional fabrication and may increase the overall cost.
Matching upstands create a consistent finish but require additional material and cutting. A full-height splashback normally costs more because it uses a larger section of material and may require socket, switch or extractor cut-outs.
Large pieces can be difficult to carry through narrow entrances, hallways or staircases. Upper-floor properties, restricted parking and long carrying distances may increase the installation requirements.
A square-metre price is useful for initial comparisons, but it does not tell you the complete cost of a worktop project.
For example, a kitchen might have four square metres of visible worktop. However, the slab layout may leave unusable offcuts or require an additional slab to accommodate an island or long section.
The final quotation must also account for:
When comparing two quotations, make sure they use the same specification. Confirm that both include the same:
A lower material price does not always mean a lower completed project price.
Quartz remains a widely recognised search term because homeowners associate it with consistent colours, marble-effect patterns and relatively straightforward everyday maintenance.
Mo’s Stonex presents Elorā as a modern engineered stone alternative for customers looking for the quartz appearance without traditional crystalline silica content, based on the current product specification. The current collection includes white, marble-effect, veined and warm-toned designs.
Elorā should not be described as traditional quartz. It is a separate engineered stone collection.
At the time of writing, selected Elorā surfaces are displayed on the Mo’s Stonex website at approximately £250 to £300 per square metre. These displayed surface prices should not be treated as complete supplied-and-installed project prices.
Your final quotation will also depend on:
A like-for-like quotation based on the same kitchen layout is the best way to compare Elorā with a traditional quartz specification.
Traditional engineered stone can contain crystalline silica. The primary occupational risk occurs during fabrication when silica-containing material is cut, ground or polished and respirable dust is released.
HSE guidance published in May 2026 states that engineered stone can contain up to 95% crystalline silica. It makes clear that dry cutting is unacceptable and identifies controls including water suppression, suitable respiratory protective equipment and regular health surveillance.
HSE also explains that exposure to respirable crystalline silica dust can cause silicosis, lung cancer and chronic obstructive pulmonary disease. See the official HSE silica dust guidance for further information.
This risk relates principally to workers involved in cutting and processing the material. For a more detailed explanation, read our guide to what silica is and why material composition matters.
Mo’s StoneX currently presents Elorā as an engineered stone range specified as containing 0% crystalline silica, based on the current product specification. Product claims should always be checked against the current product specification before purchase.
For many kitchens, an engineered stone surface can offer a useful balance of appearance, durability and everyday practicality.
It may be worth considering when you want:
However, the best material depends on your budget, kitchen design, preferred appearance and how the surface will be used. Before making a decision, compare engineered stone with sintered stone, natural stone and compact surfaces rather than selecting a material based on price alone.
To receive a useful initial estimate, provide as much information as possible. This should include:
A professionally produced kitchen plan is helpful but not essential for an initial estimate. A clear hand-drawn plan with approximate measurements may also be sufficient.
Once the cabinets are installed and ready, a professional template can be completed before fabrication begins.
As an indicative guide, a medium-sized supplied, fabricated and installed worktop project may cost approximately £1,800 to £3,000. Smaller and simpler kitchens may cost less, while large kitchens, islands and premium designs can exceed £5,000.
A practical budgeting range is approximately £250 to £700 or more per square metre, depending on the design, thickness, slab requirements, fabrication and installation. Specialist or particularly complex projects can exceed this range.
Not always. Some advertised prices cover the surface or slab only, while others include templating, fabrication, delivery and fitting. Check whether cut-outs, installation and VAT are included before comparing prices.
A 20mm worktop may be less expensive, but this is not guaranteed. Slab availability, edge construction, fabrication and the selected surface can affect the final difference.
Plain and commonly stocked designs are often more affordable than heavily veined, marble-effect or specialist finishes. However, slab availability and layout efficiency can be just as important as colour.
In many cases, yes. Existing cabinets may be retained if they are level, structurally sound and suitable for supporting the new worktop. Their condition should be assessed before templating.
Not necessarily. A price shown per square metre may relate to the surface itself and may exclude templating, fabrication, cut-outs, delivery, installation or VAT. Request an itemised quotation before making a decision.
Every kitchen is different, so the most reliable way to understand the cost is to request a quotation based on your actual design.
Send Mo’s StoneX your kitchen plan, approximate measurements or photographs, together with your preferred surface and installation postcode. Our team can then prepare an initial estimate covering the material, fabrication and installation requirements for your project.
